The new Leister IGNITER biomass ignition blower from Leister has been specially developed for installation in pellet
and wood chip biomass boilers and wood burners. The design and perfectly coordinated functionality will not fail to impress. The IGNITER has what it takes. The interfaces have been chosen so that it can easily be installed into any biomass wood burning furnace and biomass wood burning stoves. Leister Igniter used in biomass wood burners and biomass boilers.

PLEASE NOTE THAT THE PLUG WITH STRAIN RELIEF ARE SOLD SEPERATELY PART CODE 142.976

IGNITER BM4 230v 1100W 140.711 for Wood Pellet Boilers and Wood Chip Boilers
The new IGNITER ignition blower from Leister has been specially developed for installation into wood pellet boilers and wood chip boilers. The IGNITER BM4 140.711 with 1.1 kW is less powerful and more economical than it's bigger brother (139.231) but still has what it takes to operate flawlessly and consistently.

Again it shares the simple interface design with it's 1600W stable-mate, via end-on connector plug, for easy installation or removal into any heating boiler with trouble free operation.

It comes with a well thought out assembly support for positioning into biomass boilers, and a built in connection adapter for air hose location. Also as standard is heating element protection as well as device protection via a temperature protection circuit.

Key Features:

Technical Data: Leister IGNITER BM4 230v 1100W 140.711 for biomass boilers
Voltage V: 230
Frequency Hz: 50-60
Power rating kW: 1.1
Min. air volume l/min @ 20°C: 230
Air pressure kPa: 2.48
Max temperature °C: 600
Noise emission level dB (A): 68
Aperture ∅: 90mm
Weight kg: 1.0 (without power supply cord) 1.2
Length 283mm
Igniter Manufactured by Leister in Sarnen Kaegiswil, Switzerland CH6060.

Element to suit Item Code 150.871