Our expertise in air impact wrenches combined with the convenience and mobility of battery power to provide the first cordless ½” impact wrench with 2 shut-off positions going up to 850+ ft.lbs / 1150+ Nm

Features
4 settings in forward, to be set up with the touch pad on the back side of the tool
- Slow mode to approach without impacting (hand tightening around 3.7 ft.lbs / 4-5 Nm)
- Fast mode to tighten wheels close to recommended torque without overtightening (around 50 ft.lbs / 70 Nm)
50%: around 425 ft.lbs / 580 N
100% of maximum torque around 850+ ft.lbs / 1150+ Nm
1 setting @ full power in reverse 850+ ft.lbs / 1150+ Nm
5 bumpers all around the tool, 1 in front of the clutch housing
Brushless motor
4 Front LED lights for dark spaces
Single-hand Forward and Reverse operation plus Safety locking position
Soft thermoplastic rubber grip
The CP8849 Series is to be used as a « snugging » tool to come close to the car manufacturer’s specified torque rating. The final tightening should be done with a calibrated torque wrench, this way, we ensure the end of overtightening.
Torque results could vary greatly depending on the type of wheel and many other factors.

Model CP8849
Part number 8941088492
Battery voltage 20 Volt
Blows per minute 2300
European Directives Machinery (2006/42/EC), EMC(2014/30/EU), RoHs (2011/65/EU)
European Sound standard EN 62841
European Standards EN 62841-1:2015, EN 62841-2-2:2014, EN 55014-1:2017, EN 55014-2:2015, EN50581-1:2012
Free speed 1800 rpm
Free speed position 1 600 rpm
Free speed position 2 1200 rpm
Free speed position 3 1000 rpm
Height 225 mm 8.85 "
Length 255 mm 0.82 ft
Maximum Torque (reverse) 1150 Nm 850 ft.lbs
Net weight 2.88 kg 6.34 lb
Number of positions 4
Sound Power 112.5 db(A)
Sound pressure 101.5 db(A)
Sound uncertainty 3 db(A)
Square drive 1/2 "
Vibration 16.1 m/s²
Vibration ISO ISO-28927-2
Vibration uncertainty (K) 1 1/2 m/s²
Weight without battery 2.88 kg 6.34 lb
Width 84 mm