Need some help? 01302 710868

Providers of garage equipment & tools since 1971



Workshop Waste Oil Heater 436,000 BTU Which Has A Multi Fuel Capability - Waste Oil, Heating & Diesel Oil.

Automatic Ignition Model - Automatic Pre-Heating of Used Oil.

A high capacity axial fan draws air from the workshop and expels a 8100 cu m/hr heated air flow into the building
In summertime, the heater fans can be used for ventilation only - 8100 cu m/hr cool recirculated air flow with two Swivel Exit Heads to direct the air flow.

Operate using waste oil from diesel or petrol engines, gearboxes, transmissions, hydraulic systems, diesel oil or any combination of these. The following must not be used; solvents, thinners, petro-chemical based oils, transformer oil or any oil above SAE 90. Can also operate from diesel oil, or heating oil only.

Full combustion is achieved in a vaporising system and non burnable residue is retained in the burner pan. This system does not produce any unpleasant smell or smoke and the emissions from the flue stack are well below permitted contamination levels.

This heating technology permits the end user to recover the investment costs, possibly within one heating season, because of the savings made from using waste oil instead of a more expensive fuel oil.

*Voltage : 400V 3-phase
*Nominal Heat Capacity BTU : 436,000 (actual heat generated by the heater)
*Max Heat Output :390,000 BTU/hr (actual heat that blows out from the heater)
*Heated Air Flow : 8100 cubic metres/hour
*Fuel Consumption : Approx 12.8 litres/hr
*Day Tank Capacity : 130 litres
*Dimensions : 900 W x 2060 D x 2175 H (mm)

Requires Flue Kit 98.085.170

** Not Sure How Much Heat You Need.... Download Our Parts List & It's All Explained **
***** We Also Offer A Wide Range Of Spare Parts For The Thermobile Heater Range *****
** Always look into registering your heater with your local authority**

Additional Info

Additional Info

Weight 0.0000
Country of Manufacture N/A
Size N/A