Providers of garage equipment & tools since 1971

TruCheck Plus 200 - 2000 N.m

Code: 43245



TruCheck Plus 2000 N·m
As some customers require more flexibility than the basic TruCheck model, the 'Plus' adds a comprehensive range of features. With three modes of operation the TruCheck Plus is suitable for click wrenches, dial and electronic wrenches and in 'track' mode will continuously monitor the torque signal.

There are two torque units: N·m and lbf·ft.
TruCheck Plus also has a user selectable 'limit' feature. The operator sets the target torque and tolerance and the instrument will calculate whether the reading is within tolerance and indicate the results by illuminating one of three coloured LEDs: orange = low, green = OK, red = high.
TruCheck Plus has an RS-232 output and comes complete with and RS-232 cable. The reading instrument measurement unit and limit status (Low, OK and High) are output via RS-232.
TruCheck has an accuracy of +/-1% of reading over operating range of 200 - 2000 N·m and comes with a traceable calibration certificate.

Product's part number: 43245
Product's NATO number:
Product's Accuracy:
Operates between: 200.0 - 2000.0 N·m
148.0 - 1475.0 lbf·ft
1770.0 - 17701.0 lbf·in

Technical Specification
Dimensions: 145.5mm deep x 175mm wide x 85mm high.
Accuracy: +/-1%, +/-1 digit over the stated operating range.
Display: 4 Digit, 7 segment LED. With update rate of twice per second (2Hz).
Temp Range - Operating: +5ºC to +40ºC
Temp Range - Storage: -20ºC to +70ºC
Auto Reset Hold Time: 2 seconds
Electromagnetic Compatibility (EMC) Directive: In conformance with EN 61326:1997
Weight (for shipping): 5.26 Kg
Drive Size: 27mm male hexagon. Supplied with 1" square drive socket.

There are two torque units - N·m and lbf·ft (always calibrated in N·m).
Supplied with a Traceable Calibration Certificate.

Additional Info

Additional Info

Weight 0.0000
Country of Manufacture N/A
Size N/A