Need some help?
01302 710868

Brake Fluid Tester (Boiling Point)

Code: 6802

Be the first to review this product




TBT6000 Laser Brake Fluid Boiling Point Tester

Brake Fluid Boiling Point Tester works by means of a simple boiling test on a sample of brake fluid taken from the vehicle. This then gives a clear indication of the boiling temperature of the fluid and if the fluid contains moisture or not.

• Gives the boiling point of any brake fluid
• The brake fluid tester is powered by the vehicle battery
• Easy to read LCD Display
• Syringe and glass sampling container included
• Includes full operating Instructions

Non-silicone based brake fluids absorb moisture whilst in the vehicles system and therefore effects the braking efficiency and therefore safety is greatly reduced. As the level of moisture in the brake fluid increases, the boiling point gets lower, and the fluid cannot safely perform its vital function. Therefore brake fluid should be tested, and the most efficient and accurate method of testing brake fluid is to actually measure its boiling point. The Laser Tools Brake Fluid Boiling Point Tester (part number 6802) is designed to measure the boiling point of brake fluid very quickly and with digital accuracy.

It works on all grades of brake fluid, the bright LCD screen shows clearly the temperature the brake fluid has boiled at, and recommends whether the brake fluid in the vehicle should be replaced or not.

Quick and easy to set up, use the supplied syringe to collect a sample of brake fluid from the reservoir. Place this sample into the small glass container and then the probe from the device is placed into this fluid. Select the required grade of brake fluid on the device, and start the test. When the test has completed, the actual boiling point of the fluid is displayed, plus the standard dry and wet boiling points for the grade being tested. If “OK” is displayed, the brake fluid is within the safe range; if the warning symbol is displayed — brake fluid is going out of range — replacement is recommended; if the ‘X’ symbol is displayed — brake fluid is out of range and must be replaced immediately.

As most vehicle manufacturers recommend that brake fluid is changed every two years, the Laser Tools Brake Fluid Boiling Point Tester is an easy to use but very accurate method of testing brake fluid efficiency. You can then offer your customer accurate information with a very clear recommendation on how to proceed in this safety critical area of vehicle maintenance.

And the accuracy and calibration of the device can be easily checked by testing the boiling point of clean water; if it boils at 100°C, then your tester is 100% accurate!

Similar to Alba Diagnostics ALB1100

Additional Info

Additional Info

Weight 0.0000
Country of Manufacture N/A
Size N/A


Write Your Own Review

You're reviewing: Brake Fluid Tester (Boiling Point)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
  • Reload captcha