Waste Oil 

Code: AT306

The AT 306 is a stand alone radiant heater only and therefore does not have a blower. Due to a perforated burning chamber the AT 306 is not recommended for applications where explosive vapors are present. The AT 306 will comfortably heat 1,500 square feet and runs on low at 66,000 BTU and high at 80,000 BTU. It has a 50 litre tank and uses between 2 - 3 litres of fuel per hour. The AT306 is a Manaul Ignition Waste Oil Heater.

A Standard Flue Kit Is Included in this price. (41.900.840)

Heat Output BTU : 60,000 - 80,000 BTU/hr (actual maximum will depend on type of waste oil used)
Fuel Consumption : 2 - 3 litres/hr
Voltage : 230V
Fuel Tank Capacity : 50 litres
Dimensions : 540 W x 980 D x 1130 H (mm)
Weight: 67kg
Flue Connection: 130mm

** Not Sure How Much Heat You Need.... Download Our Parts List & It's All Explained **
***** We Also Offer A Wide Range Of Spare Parts For The Thermobile Heater Range *****

FREE CARRIAGE ON THIS PRODUCT (UK MAINLAND)

Our Price:  £969.00  (Ex VAT at 17.5%)
 

Code: AT307

The AT 307 comes with the top mounted Thermo-blower and an internal combustion fan. It will comfortably heat 1,500 square feet and runs on low at 66,000 BTU and high at 80,000 BTU. It has a 50 litre tank and uses between 2 - 3 litres of fuel an hour. The AT307 is a Manaul Ignition Waste Oil Heater.

A Standard Flue Kit Is Included in this Price (41.900.840)

Heat Output BTU : 60,000 - 80,000 BTU/hr (actual maximum will depend on type of waste oil used)
Heated Air Flow : 1000 cubic metres/hour
Fuel Consumption : 2 - 3 litres/hr
Voltage : 230V
Fuel Tank Capacity : 50 litres
Dimensions : 540 W x 1050 D x 1270 (mm)
Weight: 84kg
Flue Connection: 130mm

** Not Sure How Much Heat You Need.... Download Our Parts List & It's All Explained **
***** We Also Offer A Wide Range Of Spare Parts For The Thermobile Heater Range *****

FREE CARRIAGE ON THIS PRODUCT (UK MAINLAND)

Our Price:  £1,289.00  (Ex VAT at 17.5%)
 

Code: AT400

The AT 400 comes with an internal fan on the back of the unit so it blows across the heat exchanger as well as an internal combustion fan. The burner plate easily slides out for quick cleaning. It will comfortably heat 5,000 square feet and runs on low at 82,000 BTU and high at 112,000 BTU. It has a 50 litre tank and uses between 2.5 - 4.3 litres of fuel an hour. The AT400 is a Manual Ignition Waste Oil Heater.

A Standard Flue Kit Is Included in this Price (41.900.840)

Heat Output BTU : 64,000 - 112,000 BTU/hr (actual maximum will depend on type of waste oil used)
Heated Air Flow : 3000 cubic metres/hour
Fuel Consumption : 2.5 - 4.3 litres/hr
Voltage : 230V
Fuel Tank Capacity : 55 litres
Dimensions : 820 W x 1100 D x 1080 H (mm)
Weight: 130kg
Flue Connection: 130mm

** Not Sure How Much Heat You Need.... Download Our Parts List & It's All Explained **
***** We Also Offer A Wide Range Of Spare Parts For The Thermobile Heater Range *****

FREE CARRIAGE ON THIS PRODUCT (UK MAINLAND)

Our Price:  £1,749.00  (Ex VAT at 17.5%)
 

Code: AT500

The AT 500 comes with an internal fan on the back of the unit so it blows across the heat exchanger as well as an internal combustion fan. The burner plate easily slides out for quick cleaning. It will comfortably heat 7,000 square feet and runs on low at 102,000 BTU and high at 170,000 BTU. It has a 50 litre tank and uses between 3.8 - 6.2 litres of fuel an hour. The AT500 is a Manaul Ignition Waste Oil Heater.

A Standard Flue Kit Is Included in this Price (41.910.225)

Heat Output BTU : 102,000 - 170,000 BTU/hr (actual maximum will depend on type of waste oil used)
Heated Air Flow : 3000 cubic metres/hour
Fuel Consumption : 3.2 - 5.2 litres/hr
Voltage : 230V
Fuel Tank Capacity : 55 litres
Dimensions : 820 W x 1150 D x 1280 H
Weight: 175kg
Flue Connection: 180mm

** Not Sure How Much Heat You Need.... Download Our Parts List & It's All Explained **
***** We Also Offer A Wide Range Of Spare Parts For The Thermobile Heater Range *****

FREE CARRIAGE ON THIS PRODUCT (UK MAINLAND)

Our Price:  £2,139.00  (Ex VAT at 17.5%)
 

Code: SB40

Workshop Waste Oil Heater 140,000 BTU Which Has A Multi Fuel Capability - Waste Oil, Heating & Diesel Oil.

Automatic Ignition Model - Automatic Pre-Heating of Used Oil

A high capacity axial fan draws air from the workshop and expels a 3200 cu m/hr heated air flow into the building
In summertime, the heater fans can be used for ventilation only - 3200 cu m/hr cool recirculated air flow with two Swivel Exit Heads to direct the air flow .

Operate using waste oil from diesel or petrol engines, gearboxes, transmissions, hydraulic systems, diesel oil or any combination of these. The following must not be used; solvents, thinners, petro-chemical based oils, transformer oil or any oil above SAE 90. Can also operate from diesel oil, or heating oil only.

Full combustion is achieved in a vaporising system and non burnable residue is retained in the burner pan. This system does not produce any unpleasant smell or smoke and the emissions from the flue stack are well below permitted contamination levels.

This heating technology permits the end user to recover the investment costs, possibly within one heating season, because of the savings made from using waste oil instead of a more expensive fuel oil.

*Voltage : 230V
*Max Heat Output :140,00 BTU/hr (actual maximum will depend on type of waste oil used)
*Heated Air Flow : 3200 cubic metres/hour
*Fuel Consumption : Approx 4.5 litres/hr
*Day Tank Capacity : 80 litres
*Dimensions : 690 W x 1860 D x 1850 H (mm)

** Not Sure How Much Heat You Need.... Download Our Parts List & It's All Explained **
***** We Also Offer A Wide Range Of Spare Parts For The Thermobile Heater Range *****

FREE CARRIAGE ON THIS PRODUCT (UK MAINLAND)

Our Price:  £2,895.00  (Ex VAT at 17.5%)
 

Code: SB60

Workshop Waste Oil Heater 180,000 BTU Which Has A Multi Fuel Capability - Waste Oil, Heating & Diesel Oil.

Automatic Ignition Model - Automatic Pre-Heating of Used Oil

A high capacity axial fan draws air from the workshop and expels a 4100 cu m/hr heated air flow into the building
In summertime, the heater fans can be used for ventilation only - 4100 cu m/hr cool recirculated air flow with two Swivel Exit Heads to direct the air flow .

Operate using waste oil from diesel or petrol engines, gearboxes, transmissions, hydraulic systems, diesel oil or any combination of these. The following must not be used; solvents, thinners, petro-chemical based oils, transformer oil or any oil above SAE 90. Can also operate from diesel oil, or heating oil only.

Full combustion is achieved in a vaporising system and non burnable residue is retained in the burner pan. This system does not produce any unpleasant smell or smoke and the emissions from the flue stack are well below permitted contamination levels.

This heating technology permits the end user to recover the investment costs, possibly within one heating season, because of the savings made from using waste oil instead of a more expensive fuel oil.

*Voltage : 230V
*Max Heat Output :180,00 BTU/hr (actual maximum will depend on type of waste oil used)
*Heated Air Flow : 4100 cubic metres/hour
*Fuel Consumption : Approx 6 litres/hr
*Day Tank Capacity : 80 litres
*Dimensions : 690 W x 1860 D x 1850 H (mm)

** Not Sure How Much Heat You Need.... Download Our Parts List & It's All Explained **
***** We Also Offer A Wide Range Of Spare Parts For The Thermobile Heater Range *****

FREE CARRIAGE ON THIS PRODUCT (UK MAINLAND)

Our Price:  £3,199.00  (Ex VAT at 17.5%)
 

Code: SB80

Workshop Waste Oil Heater 270,000 BTU Which Has A Multi Fuel Capability - Waste Oil, Heating & Diesel Oil.

Automatic Ignition Model - Automatic Pre-Heating of Used Oil

A high capacity axial fan draws air from the workshop and expels a 6200 cu m/hr heated air flow into the building
In summertime, the heater fans can be used for ventilation only - 6200 cu m/hr cool recirculated air flow with two Swivel Exit Heads to direct the air flow .

Operate using waste oil from diesel or petrol engines, gearboxes, transmissions, hydraulic systems, diesel oil or any combination of these. The following must not be used; solvents, thinners, petro-chemical based oils, transformer oil or any oil above SAE 90. Can also operate from diesel oil, or heating oil only.

Full combustion is achieved in a vaporising system and non burnable residue is retained in the burner pan. This system does not produce any unpleasant smell or smoke and the emissions from the flue stack are well below permitted contamination levels.

This heating technology permits the end user to recover the investment costs, possibly within one heating season, because of the savings made from using waste oil instead of a more expensive fuel oil.

*Voltage : 400V 3-phase
*Max Heat Output :270,00 BTU/hr (actual maximum will depend on type of waste oil used)
*Heated Air Flow : 6200 cubic metres/hour
*Fuel Consumption : Approx 9 litres/hr
*Day Tank Capacity : 130 litres
*Dimensions : 900 W x 2060 D x 2175 H (mm)

** Not Sure How Much Heat You Need.... Download Our Parts List & It's All Explained **
***** We Also Offer A Wide Range Of Spare Parts For The Thermobile Heater Range *****

FREE CARRIAGE ON THIS PRODUCT (UK MAINLAND)

Our Price:  £4,150.00  (Ex VAT at 17.5%)
 

Code: SB110

Workshop Waste Oil Heater 390,000 BTU Which Has A Multi Fuel Capability - Waste Oil, Heating & Diesel Oil.

Automatic Ignition Model - Automatic Pre-Heating of Used Oil

A high capacity axial fan draws air from the workshop and expels a 8100 cu m/hr heated air flow into the building
In summertime, the heater fans can be used for ventilation only - 8100 cu m/hr cool recirculated air flow with two Swivel Exit Heads to direct the air flow .

Operate using waste oil from diesel or petrol engines, gearboxes, transmissions, hydraulic systems, diesel oil or any combination of these. The following must not be used; solvents, thinners, petro-chemical based oils, transformer oil or any oil above SAE 90. Can also operate from diesel oil, or heating oil only.

Full combustion is achieved in a vaporising system and non burnable residue is retained in the burner pan. This system does not produce any unpleasant smell or smoke and the emissions from the flue stack are well below permitted contamination levels.

This heating technology permits the end user to recover the investment costs, possibly within one heating season, because of the savings made from using waste oil instead of a more expensive fuel oil.

*Voltage : 400V 3-phase
*Max Heat Output :390,00 BTU/hr (actual maximum will depend on type of waste oil used)
*Heated Air Flow : 8100 cubic metres/hour
*Fuel Consumption : Approx 12.8 litres/hr
*Day Tank Capacity : 130 litres
*Dimensions : 900 W x 2060 D x 2175 H (mm)

** Not Sure How Much Heat You Need.... Download Our Parts List & It's All Explained **
***** We Also Offer A Wide Range Of Spare Parts For The Thermobile Heater Range *****

FREE CARRIAGE ON THIS PRODUCT (UK MAINLAND)

Our Price:  £4,750.00  (Ex VAT at 17.5%)
 

Code: 41.900.840

Standard Flue Kit for AT306, AT307 & AT400.

Consists of:
1x T Piece c/w Draught Stabiliser
4x 1 Metre Lengths of Flue Piping (150mm Diametre)
(Including Change Over Length)
1x Terminal Pipe

We Have A Wide Range Of Individual Flue Components Available. Please Ask For A Quote For Individual Items That You May Require.

Our Price:  £215.00  (Ex VAT at 17.5%)
 

Code: 41.910.225

Standard Flue Kit for AT500 Heater.

Consists of:
1x T Piece c/w Draught Stabiliser
5x 1 Metre Lengths of Flue Piping (200mm Diametre)
Including Change Over Length)
1x Terminal Pipe

We Have A Wide Range Of Individual Flue Components Available. Please Ask For A Quote For Individual Items That You May Require.

Our Price:  £295.00  (Ex VAT at 17.5%)
 

Code: 98.085.746

The Standard Flue Kit Consists Of:

1x T Piece c/w Draught Stabiliser
4 x 1 Metre Lengths Of Flue Piping
1 x Terminal Pipe

We Have A Wide Range Of Individual Flue Components Available. Please Ask For A Quote For Individual Items That You May Require.

Our Price:  £215.00  (Ex VAT at 17.5%)
 

Code: 98.085.100

The Standard Flue Kit Consists Of:

1x T Piece c/w Draught Stabiliser
4 x 1 Metre Lengths Of Flue Piping
1 x Terminal Pipe

We Have A Wide Range Of Individual Flue Components Available. Please Ask For A Quote For Individual Items That You May Require.

Our Price:  £265.00  (Ex VAT at 17.5%)
 

Code: 98.085.170

The Standard Flue Kit Consists Of:

1x T Piece c/w Draught Stabiliser
4 x 1 Metre Lengths Of Flue Piping
1 x Terminal Pipe

We Have A Wide Range Of Individual Flue Components Available. Please Ask For A Quote For Individual Items That You May Require.

Our Price:  £265.00  (Ex VAT at 17.5%)