Alternator Pulley Remover/Installer Kit
Code: AST4955
Alternator Pulley Remover/Installer Kit (‘Freewheel’ Pulley) Specialised kit of Sockets and Adaptors required to remove and install ‘freewheel’ alternator pulley on popular alternator makes, including Bosch Valeo Magneti Marelli Denso etc. Kit comprises M10XZN, T50 and M8 Hex. Sockets ..
more»
Our Price:
£39.90
(Ex VAT at 17.5%)
|
 |
13pc Alternator Freewheel Removal Set
Code: SX401
• Easy removal of freewheel pulley from alternator either on or off the vehicle. • Allows alternator shaft to be held while the pulley retainer is removed. • Applications: Alfa Romeo, Audi, BMW, Citroen, Fiat, GM, Mercedes, Mitsubishi, Renault, Seat, Skoda, ..
more»
Our Price:
£35.95
(Ex VAT at 17.5%)
|
|
6pc Alternator Freewheel Pulley Removal
Code: SX400
Permits easy removal of free wheel pulley from alternator either on or off the vehicle. Insert allows alternator shaft to be held while the pulley retainer is removed with the key nut. Applications: Audi, BMW, Citroen, Ford, Mercedes, Opel, Peugeot, ..
more»
Our Price:
£24.30
(Ex VAT at 17.5%)
|
|
VW Ball Joint Socket
Code: AST3276
Models: Transporter M14XZN x 100mm Socket for ball joint removal/Installation
more»
Our Price:
£21.90
(Ex VAT at 17.5%)
|
|
Ball Joint Socket - 51mm. PSA
Code: AST3278
Special castellated socket with 4 drive lugs –51mm dia. Designed to remove & install screw type lower ball joints in PSA models Models: Citroën: BX, Xantia & XM Peugeot: 305, 405 & 605
more»
Our Price:
£14.90
(Ex VAT at 17.5%)
|
|
Ball Joint Socket - Toyota
Code: AST4427
Toyota: M9 XZN (Spline) / 120mm
more»
Our Price:
£19.40
(Ex VAT at 17.5%)
|
|
Diesel Injector Socket 22mm A/F
Code: AST3390W
“WINDOWED” Socket specially designed to remove and install screw-in diesel injectors, including those with lift sensors / wiring. Models: VAG, Nissan, Mitsubishi, Toyota
more»
Our Price:
£11.60
(Ex VAT at 17.5%)
People who bought this item also bought:
|
|
Diesel Injector Socket 27mm A/F
Code: AST4173W
“WINDOWED” Socket specially designed to remove and install screw-in diesel injectors, including those with lift sensors / wiring. Models: BMW, Fiat, Ford, VAG
more»
Our Price:
£10.55
(Ex VAT at 17.5%)
|
|
Diesel Injector Socket 28mm A/F
Code: AST3271W
“WINDOWED” Socket specially designed to remove and install screw-in diesel injectors, including those with lift sensors / wiring. Models: Chrysler, Rover, Fiat, Alfa Romeo
more»
Our Price:
£11.60
(Ex VAT at 17.5%)
|
|
Diesel Injector Socket 21mm A/F
Code: AST4894
“WINDOWED” Socket specially designed to remove and install screw-in diesel injectors, including those with lift sensors / wiring. Ford Duratorq 2.0/2.2/2.4 Transit & Mondeo
more»
Our Price:
£14.70
(Ex VAT at 17.5%)
|
|
Diesel Injector Socket Set
Code: AST4934
A range of “WINDOWED” Sockets specially designed to remove and install screw-in diesel injectors, including those with lift sensors / wiring. Socket Combination Set - Comprises of 1 each of the following 4 Injector Sockets AST4894: 21mm A/F ..
more»
Our Price:
£32.90
(Ex VAT at 17.5%)
|
|
6pc Diesel Injector Socket Set
Code: SX0401
• Sizes: 21mm, 2 x 22mm, 27mm, 2 x 28mm. • Applications: Audi, BMW, Fiat, Ford, Mercedes, Nissan, Peugeot, Rover, Seat, Vauxhall, Volvo, VW. VM 2.4D/2.5D Engined Alfa Romeo, Chrysler, Land Rover, Rover. Scania, Volvo LGVs. FREE 20 Function Digital ..
more»
Our Price:
£49.95
(Ex VAT at 17.5%)
|
|
Injector Socket 21 x 90mm 1/2”Sq Drive
Code: SX042
• Chrome Molybdenum open-sided socket for diesel injector removal and installation. • Suitable for use on Ford Duratorq engines.
more»
Our Price:
£11.75
(Ex VAT at 17.5%)
|
|
Injector Window Socket Set 4pc
Code: SX040
Four Chrome Vanadium open-sided 1/2”Sq drive sockets for injector removal and installation. Contents: 80 x 22mm, 100 x 22mm, 80 x 27mm, 80 x 28mm
more»
Our Price:
£37.99
(Ex VAT at 17.5%)
|
|
3/8 Drive Lambda Sensor Socket
Code: SX022
Expert Quality, for Lambda sensors. Special slot in the side of socket for sensor wire clearance. Also suitable for diesel injectors found in Mitsubishi, Nissan, Opel, Vauxhall and VW vehicles. Manufactured from chrome vanadium steel hardened, tempered and chemically blacked for ..
more»
Our Price:
£7.56
(Ex VAT at 17.5%)
|
|
22mm Oxygen Sensor Wrench Flex Handle
Code: SX0222
• 22mm Hardened and tempered Chrome Vanadium steel socket with polished chrome finish. • Flexibly mounted handle with off-set grip for maximum access. • Suitable for heated and unheated oxygen sensors. • Cut-out section allows socket to pass over wiring.
more»
Our Price:
£18.95
(Ex VAT at 17.5%)
|
|
Oxygen Sensor Socket Set 7pc
Code: 01659000
Oxygen Sensor Socket Wrench Swivel handled 22mm Socket Wrench for Lambda Sensor removal Double sided (hex /bi-hex) 22mm socket Ideal for restricted access applications Handle length 250mm
more»
Our Price:
£19.50
(Ex VAT at 17.5%)
|
|
Oxygen Sensor Socket Set 7pc
Code: SX032
Lamda Sensor Removal Socket Set suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. Windows and slots enable sockets to be fitted over wiring harness. Sockets: 3/8”Sq Drive; 22mm(7/8”) Offset Oxygen Sensor Socket - 30mm, 1/2”Sq ..
more»
Our Price:
£60.00
(Ex VAT at 17.5%)
|
|
Offline Impact Socket Set 8pc 1/2"D
Code: 4222
Unique product featuring the Off-Line Driver function along with impact quality Chrome Molybdenum. Can be used as standard driver or off-line where access is restricted. Sizes: 12/13/14/15/16/17/18/19mm. Presented in a blow mould case for storage.
more»
Our Price:
£62.88
(Ex VAT at 17.5%)
|
|
Motorcycle Spindle Tool
Code: VS1805
• Prevents spindle from spinning when tightening or loosening wheel nut. • Use socket on free end of tool to hold spindle. • Applications: 24mm; Suzuki and Honda, 22mm; Kawasaki, 19mm; Yamaha.
more»
Our Price:
£8.35
(Ex VAT at 17.5%)
|
|
Ribe Socket Set (7 Sizes)
Code: AST4330A
Ribe - Long Reach Sockets Long Reach Sockets are ideal for applications such as cylinder head bolts, cam cover, alternator, headlight fasteners. Set comprises of 7 Sockets 14mm to 6mm sizes – All Long Reach, 90/100mm. * ..
more»
Our Price:
£94.90
(Ex VAT at 17.5%)
|
|
Head Bolt Socket M10 Ribe Form/140mm
Code: AST4426
Head Bolt Socket suitable for: V W Group – Audi / Volkswagen: M10 Ribe Form / 140mm
more»
Our Price:
£19.40
(Ex VAT at 17.5%)
|
|
Head Bolt Socket M10 XZN (Spline)/140mm
Code: AST4428
Head Bolt Socket suitable for: Mercedes vans, V W Group, Ford, Vauxhall/Opel: M10 XZN (Spline) / 140mm
more»
Our Price:
£15.60
(Ex VAT at 17.5%)
|
|
Head Bolt Socket M12 XZN (Spline)/140mm
Code: AST4429
Head Bolt Socket suitable for: V W Group, Ford, Vauxhall/Opel, Mercedes, Volvo: M12 XZN (Spline) / 140mm
more»
Our Price:
£16.90
(Ex VAT at 17.5%)
|
|
Cylinder Head Bolt Sockets
Code: AST4430
A range of LONG REACH Specialist Sockets for the removal and installation of Cylinder Head Bolts Set AST4430 Comprises 1 each of: AST4426 – M10 Ribe Form AST4428 – M10 Spline (Tri-square) AST4429 – M12 Spline (Tri-square) AST4431 – M10 Hexagon ..
more»
Our Price:
£108.90
(Ex VAT at 17.5%)
|
|
Head Bolt Socket TX60 / 140mm
Code: AST4432
Head Bolt Socket suitable for: Ford (1.8Di): TX60 / 140mm
more»
Our Price:
£19.40
(Ex VAT at 17.5%)
|
|
Ribe Socket Set - Extra Long (3 sizes)
Code: AST4457
Extra Long Reach Sockets are for access to sump cover fasteners, particularly at the gearbox end. Set AST4457 Comprises 3 Sockets 9, 8 & 7mm sizes – All Extra Long Reach, 200 to 240mm. * All Tools and Parts ..
more»
Our Price:
£46.90
(Ex VAT at 17.5%)
|
|
16XZN Sump Plug Socket - Audi / VW
Code: AST4468
Suitable for the following Models: Audi & Volkswagen M16 XZN (Spline) Tamperproof x 60mm long
more»
Our Price:
£16.80
(Ex VAT at 17.5%)
|
|
Ribe Socket Set - Short/Extra Short
Code: AST4470
Short Reach Sockets are for applications with limited space access such as timing belt covers, sprocket bolts etc. Set AST4470 Comprises 7 Sockets 10mm to 6mm sizes – All Short Reach, 45 to 63mm. * All Tools and Parts ..
more»
Our Price:
£93.90
(Ex VAT at 17.5%)
|
|
Injector Rem/Inst + Compression Test Kit
Code: AST4888
Ford 2.0/2.2/2.4 Duratorq Diesel Injector - Removal / Installation & Compression Test Adaptor Set Injector Socket & Retaining Clamp These Ford Injectors MUST BE held in correct orientation when being installed, to AVOID seat damage, and for alignment to ..
more»
Our Price:
£57.90
(Ex VAT at 17.5%)
|
|
