Code: SJBEX200

(CLASS 4) 2Ton Capacity and fully certified and approved to comply with VOSA requirements. Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Wide lift configuration meets VOSA recommendation for lifting on jacking point.

Support Arm Reach: 780-1075mm
Beam Lift: 50-245mm
Load Arm Reach: 850-1600mm
Net Weight: 94kg

Our Price:  £399.95  (Ex VAT at 17.5%)
 

Code: HPJ2.0

(Class 4) Majorlift 2 Tonne Manual Operating Jacking Beam
Supplied as standard with finger guards for CE marking and complete with 1600mm double extending top beam.

Other features :
* Minimum Effort Required With Easy Roll Bearing Support Arms
* Painted in Safety Yellow
* Test certificates supplied with all beams
* All equipment covered by 3 Years Warranty
* Supplied with a set of raiser blocks
* Finger guards supplied as standard
* Approved by VOSA for Class 4 Testing
* 1755mm Double Extending Top Beam Available at Extra Cost

SOME VEHICLE LIFTS, REQUIRE SPECIFIC SUPPORT ARMS WHICH CAN BE SUPPLIED AT EXTRA COST

Our Price:  £796.59  (Ex VAT at 17.5%)
 

Code: HPJ2.8

(Class 7) Majorlift 2.8 Tonne Manual Operating Jacking Beam
Supplied as standard with finger guards for CE marking and complete with 1600mm double extending top beam.

Other features :
* Minimum Effort Required With Easy Roll Bearing Support Arms
* Painted in Safety Yellow
* Test certificates supplied with all beams
* All equipment covered by 3 Years Warranty
* Supplied with a set of raiser blocks
* Finger guards supplied as standard
* Approved by VOSA for Class 4 Testing
* 1755mm Double Extending Top Beam Available at Extra Cost

SOME VEHICLE LIFTS, REQUIRE SPECIFIC SUPPORT ARMS WHICH CAN BE SUPPLIED AT EXTRA COST

Our Price:  £1,152.39  (Ex VAT at 17.5%)
 

Code: J50HA

Central Piston Hydraulic Jacking Beam
5000 Kilo Capacity
Fitted With Rollers For Easy Moving

Our Price:  £1,295.00  (Ex VAT at 17.5%)
 

Code: KP118

Twin Ram
13500 Kilo Capacity
Fits Pits from 850 to 1110mm Width
Supplied c/w Extensions
Easy Moving With Rollers

Our Price:  £1,325.00  (Ex VAT at 17.5%)
 

Code: KP118N

Twin Ram
13500 Kilo Capacity
For Ravaglioli 4 Post Lifts KP440, 442
Supplied c/w Extensions
Easy Moving With Rollers

Our Price:  £1,295.00  (Ex VAT at 17.5%)
 

Code: HPJ12

Majorlift 12 Tonne Manual Operating Pit Jacking Beam
Supplied as standard with finger guards for CE marking

Other features :
* Minimum Effort Required With Easy Roll Bearing Support Arms
* Painted in Safety Yellow
* Test certificates supplied with all beams
* All equipment covered by 5 Years Warranty
* Supplied with a set of raiser blocks
* Finger guards supplied as standard

PLEASE NOTE:
For pits wider than 1220m a special frame is required. This heavier gauge steel frame carries an additional charge of £130.00.

Our Price:  £2,018.25  (Ex VAT at 17.5%)
 

Code: HPJLF12

Majorlift 12 Tonne Manual Operated Lift Mounted Jacking Beam with * FIXED TRACK WIDTH *

Fast, Efficient, Reliable & Safe
These units tackle anything and everything up to 12 tonne.

Pressure Relief Valve (Prevents Overloading)
Mechanical Safety Locks
Twin Ram Operation
Load Bearing Supports & Spring Loaded Rollers
5 Year Guarantee

Our Price:  £2,078.31  (Ex VAT at 17.5%)