Code: OTC6650

Autotron 3300-3 Magnetic Induction Heater

An Induction Heater Saves You Time!!!
* Remove & Install your own automotive glass in less than 0.3 hours
* Remove stubborn graphics & stripes in seconds (Glue is removed with stripe)
* Quickly remove spay-in bed liners with little effort
* Remove & Install side mouldings in less the 0.1 hours, (re-use original OEM tape)

An Induction Heater Saves You Money!!!
* Induction Heaters safely remove adhesive bonded components (roof panels, appliques, etc...) for reuse
* Induction Heaters reduce the need for rubber/abrasive wheels and other consumables
* Induction Heaters perform tasks that previously could not be done with traditional heat sources

An Induction Heater Improves Quality & Safety!!!
* Induction Heaters only heat metal objects
* Induction Heaters will not burn or melt glass, paint, plastic, or other non-metallic materials
* Induction Heaters will rapidly heat rusted fasteners without open flame, allowing work near plastic and other sensitive areas.

What is an Induction Heater and how does it work?
* Induction Heaters are known by several different names. One of the more common names is Heat Inductor.
* Heat Inductors are nothing more than a high frequency AC inverter.
* The Heat Inductor produces high frequency electrical currents that are used to power various heating attachments. * The heating attachments are also know as inductor heads.
* The high frequency current from the Heat Inductor creates magnetic fields at the end of the inductor heads.
* The magnetic field created by the Heat Inductor causes metal object to produce internal heat.
* The inductor heads do not get hot.
* The internal heat produced by the metal object is a result of induced electrical currents in the area where the i inductor head is placed.
* Heat Inductors work much like an electrical transformer with the inductor head being the primary of the transformer and the metal object being the secondary of the transformer circuit.
* The heat produced by the Heat Inductor is ideal for the removal of all types of adhesive bonded automotive parts
* Heat Inductors have 100's of auto body repair and industrial applications.
100's of Uses !!!
* Spray-in bed liner removal
* Caulking and seam sealer removal
* Instantly cure high solids 1k and 2k primers
* Easily remove bonded roof panels and other SMC's
* Paintless dent repair
* Flameless frame rail heating
* R&I core support labels
* R&I under bonnet labels for belt, hose and AC routing
* R&I serial number labels located in door jams
* Remove vinyl stripes without solvent or rubber wheels
* Debond rear view mirror brackets
* Rapidly cure panel bonding adhesive
* Strip Paint
* Solder large electrical connectors as found on hybrid vehicles
* Shrink fit bearings and gears
* Loosen tie-rod ends
* Removal of old body filler
* Metal Shrinking
* Bending and Forming
* Vinyl black trim removal from upper door frames between front and rear windows
* Loosen studs with thread locking compounds lie the ones holding roof racks in place
* Easily remove torx bolt found in truck bed boxes and seat belts
* R&I plastic vent shades, while removing all the tape from the vehicle
* R&I OE and aftermarket fender flares... re-use the original tape
* Easily remove after market chrome rocker panels
* Thermally expand bearings and pulleys for easy installation, eliminating the need to press them on.

Unit comes complete with Glass Pro Inductor, Body Pro Inductor and Bolt Pro Inductor.

Optional accessories include..

* Welding Cart to make the unit mobile
* Versa Wedges for Windscreens
* Magnepopper Induction for dent removal
* Frame Pro Inductor for rapid heating of frame rails and structural panels of automobiles for straightening and stress relieving

Download our sale brochure, owners manual and video demonstration today...

Our Price:  £2,504.79  (Ex VAT at 15%)
 

Code: 124679

Glass Pro Inductor

The Glass Pro inductor (included with the Autotron 3300-3 system) is the primary heating attachment for the removal of windshields and other automotive glass. The Glass Pro produces heat in an area approximately 1”x4”, making it ideal for heating the pinch weld behind glass components. The glass pro can achieve a pinch weld temperature of 350F in approximately 30 seconds and can access areas normal glass removal tools can’t. The Glass Pro inductor is also great for removing adhesive bonded body panels, appliqués, and vapor barriers. It can also cure high build 1k and 2k primers in seconds, allowing block sanding in less than 1 minute. The Glass Pro inductor is encapsulated in a durable, impact and flame resistant polymer compound to ensure years of service in the harshest of environments.

Our Price:  £110.00  (Ex VAT at 15%)
 

Code: 124680

Body Pro Inductor
The Body Pro inductor (included with the Autotron 3300-3 system) is the heating inductor, most often used for painted side molding removal, as well as the removal of pin stripes, vinyl graphics, and emblems. Preheating cold panels is another useful application performed by PDR professionals and graphics specialists. The Body Pro is flexible enough to be formed to the curves of panels and around metal objects such as tie rods. It has an integral hand strap for easy manipulation and is housed within an extreme heat resistant woven silica blanket.

Our Price:  £110.00  (Ex VAT at 15%)
 

Code: 124944

Bolt Pro Inductor
The Bolt Pro inductor (included with the Autotron 3300-3 system) is a compact heating inductor that can be used in many of the same applications as tradition propane torches, without the high risk of explosion, or accidental fires. The Bolt Pro can produce temperature in excess of 1400F in just a few seconds. The concentrated heat is ideal for freeing rusted or seized fasteners in areas you wouldn’t normally use a torch, such as crack shaft bolts, lug nuts on powder coated wheels, and other heat sensitive areas. Removal of seam sealer, caulking, and heating metals for forming operations. Just like the Glass Pro, the Bolt Pro is encapsulated in a flame retardant impact resistance polymer compound for years of worry free service.

Our Price:  £110.00  (Ex VAT at 15%)
 

Code: 128834

A good windshield wedge should be sufficiently wide to evenly distribute the force against the windscreen in order to prevent cracking. It should also have a non-aggressive taper that prevents the glass from being forced out too quickly, which can also crack the glass or leave urethane on the pinch weld. The wedges should not damage painted surfaces, be heat resistant, and should not mar metal. The Versa Wedge polymer pry wedge meets all these attributes. In addition to other features. The unique design of the Versa Wedge gives technicians added leverage to lift glass away from the pinch weld without having to push the glass from the inside of the vehicle. One end of the Versa Wedge is a straight, while the other end is bent at 90 degrees to provide a prying lever. We recommend that 3 wedges be purchased with each Autotron 3300 Induction Heating System.

Our Price:  £9.99  (Ex VAT at 15%)
 

Code: 136510

Frame Pro Inductor
The Frame Pro Inductor is an optional heating attachment designed specifically for rapid heating of frame rails and structural panels of automobiles for straightening and stress relieving. It can heat 1/4 inch steel to 1300F in just a few seconds. The fast flameless heat allows technicians to apply heat to areas of the vehicle that may be near sensitive materials such as wires and hoses without causing damage. The heat is very focused and is easily monitored and controlled. Get rid of the torch/rosebud today to reduce labor, consumables, and improve safety in the shop by purchasing the Autotron Frame Pro Inductor.

Our Price:  £350.00  (Ex VAT at 15%)
 

Code: D222714RB

D222714RB Magnepopper PDR Inductor for Autotron

The Magnepopper Inductor is an optional heating attachment that allows technicians to remove soft dents by heating the panel behind the paint, relieving the stress holding the dent, thus reducing its size or eliminating it all together. This reduces the amount of outsourced PDR work as well as the amount of labor and materials used when doing using traditional repair techniques. The Magnepopper can also produce enough heat to shrink stretched metal panels and loosen siezed fasteners is hard to reach locations.

Our Price:  £120.00  (Ex VAT at 15%)
 

Code: 137195

The Autotron Mobilizer Cart is a great choice for protecting your induction heating system and increasing its mobility. Made from powder coated steel, the Mobilizer can withstand any abuse from the body shop or recycling yard. The Mobilizer has 3 convenient shelves that can be used for securing unused heating inductors and other accessories. 2 cable hangers are also included for storage of extension cords. It is compatible with most portable MIG welders and has space on the back for securing a bottle of shielding gas.

Our Price:  £60.00  (Ex VAT at 15%)