JHM Butt & Company Ltd Bush Tools 

Code: TST0010

Allows upper and lower damping bushes to be replaced in situ - without removing the rear trailing arm assembly.
GM Opel / Vauxhall Vectra 1.6 1.8 2.0 (1995 onwards) & 2.5 (1996 onwards)

Our Price:  £35.99  (Ex VAT at 17.5%)
 

Code: TST0011

Allows the outer pivot bush to be replaced in situ without removing the rear suspension lower arm or stub axle from the vehicle. Peugeot 406 1.8 1.9 2.0 (1996 onwards)

Our Price:  £39.99  (Ex VAT at 17.5%)
 

Code: TST0013

Allows the rear suspension knuckle / tie bar damping bush to be replaced in situ without removing the assembly from the vehicle.

Our Price:  £39.99  (Ex VAT at 17.5%)
 

Code: TST0014

AFT83 Rear Subframe Bush Tool - Mondeo 10/2000>
Fine pitch thread with thrust bearing enables the rear sub-frame bushes to be removed and inserted without removing the subframe from the vehicle.

Our Price:  £74.99  (Ex VAT at 17.5%)
 

Code: TST0015

AFT81 Suspension Bush Insertion Tool -
Suitable for: VW Golf IV/Volkswagen Bora/VW Beetle/Audi A3/Seat Leon/Seat Toledo 2001>

Fine pitch thread with thrust bearing enables the new style bonded rubber/plastic rear axle mounting bush to be easily inserted in a controlled manner without damage.

Our Price:  £69.99  (Ex VAT at 17.5%)
 

Code: TST0016

AFT82 Suspension Bush Insertion Tool - Ford Fiesta 1996>/Ford Ka

Fine pitch thread with thrust bearing enables the rear axle mounting bushes to be removed and inserted without removing the trailing link suspension assembly.

Our Price:  £74.99  (Ex VAT at 17.5%)
 

Code: TST0017

AFT84 Rear Suspension Bush Tool - Renault Laguna 2001>

Fine pitch thread with thrust bearing enables the rear subframe to be removed and inserted without removing the subframe. *Replacement bush shown but not included.

Our Price:  £99.99  (Ex VAT at 17.5%)
 

Code: TST0018

AFT91 Rear Bush Tool - Ford Focus 1998-2004
1.4 1.6 1.8 1.8Di 1.8TDCi 2.0 16v RS ST170

Fine pitch thread with thrust bearing enables the rear wishbone/trailing arm bush to be removed whilst in situ.
*Replacement bush shown but not included.

Our Price:  £139.99  (Ex VAT at 17.5%)
 

Code: TST0019

AFT43 Suspension Bush Tool - BMW 3 Series
E36 E46 E46 Compact (Also suitable for new 'slotted' bush (33321097009)

Fine pitch thread with thrust bearing enables the rear trailing arm bushes to be removed and replaced without removing the trailing arm.

Our Price:  £139.99  (Ex VAT at 17.5%)
 

Code: TST0020

AFT42 Suspension Bush Tool - BMW 5 & 7 Series

Fine pitch thread with thrust bearing enables the press fit rear suspension ball joints number 33326767748 to be removed and inserted in situ on E38 & E39 Models

Our Price:  £139.99  (Ex VAT at 17.5%)
 

Code: TST0021

AFT47 Rear Bush Tool - BMW 5 Series Touring

Fine pitch thread with thrust bearing enables the rear subframe bushes number 33311094036 to be removed and inserted in situ on E38 & E39 touring Models.

* TIME-SAVER *
--------------------
Allows four bushes to be replaced in less than 1 hour SAVING 3 HOURS on the time normally charged by BMW dealerships for this work.

Our Price:  £199.99  (Ex VAT at 17.5%)
 

Code: TST0022

AFT46 Rear Bush Tool - BMW X5 E53 Series

Bush replacement tool for use on rear axle carrier bushes (33311093662) as used on BMW X5 series models.
The tool features a fine pitch thread and thrust bearing to enable the rear subframe bushes to be removed / inserted - without removing the rear subframe assembly from the vehicle.

Tool shown with a replacement subframe bush - NOT INCLUDED.
This tool is NOT suitable for 5 Series E39 (See TST0024)

Our Price:  £159.99  (Ex VAT at 17.5%)
 

Code: TST0023

AFT41 Rear Ball Joint Tool - BMW 3 Series (E36)

Professional quality tool designed for use in-situ to remove & install press fit ball joints as used on BMW 3 series (E36) control arms. (Note: Ball Joint is not included)

* Not For Use With Air Impact Guns

Our Price:  £129.99  (Ex VAT at 17.5%)
 

Code: TST0024

AFT45 Rear Subframe Bush Tool - BMW E39 5 series

Bush replacement tool for use on rear axle carrier bushes (33311091422) as used on BMW E39 5 series saloons.
The tool features a fine pitch thread and thrust bearing to enable the rear subframe bushes to be removed / inserted - without removing the rear subframe assembly from the vehicle.

Tool shown with a replacement subframe bush - NOT INCLUDED.

*This tool is NOT suitable for X5 E53 Series (See TST0022)

Our Price:  £159.99  (Ex VAT at 17.5%)
 

Code: TST0025

AFT85 Track Control Arm Bush Tool VAG

Fine pitch thread with thrust bearing enables the rear bush to be removed from the front track control arm on VW Polo III / Skoda Fabia / Seat models. Replacement bush shown but not included.

Our Price:  £99.99  (Ex VAT at 17.5%)
 

Code: VS4778

• Remove/Install rear sub-frame bushes on Mondeo.
• Can be used in situ - no need to remove sub-frame from vehicle.
• Applications: Ford Mondeo 2001, 10/2000 onwards.

Our Price:  £74.95  (Ex VAT at 17.5%)
 

Code: VS720

• Tool kit for removing/installing upper and lower rear trailing arm bushes
on GM Vectra.
• Simple and easy to use, with a 19mm ratchet wrench (not supplied).

Our Price:  £45.95  (Ex VAT at 17.5%)
 

Code: VS722

• Suitable for in-situ installation of rear axle mounting bushes on selected VW and Audi vehicles.
• Use with ratchet wrench or spanner to insert composite bushes.
• Applications: Audi A3, VW Bora and Golf IV.

Our Price:  £65.95  (Ex VAT at 17.5%)
 

Code: VSE4777

• Remove/Install front mounting bushes in Laguna rear sub-frame.
• Can be used in situ - no need to remove sub-frame from vehicle.
• Applications: Renault Laguna, 2001 onwards.

Our Price:  £99.95  (Ex VAT at 17.5%)
 

Code: VSE4779

• Remove/install Fiesta IV rear axle mounting bushes.
• Can be used in situ - no need to remove trailing link assembly from vehicle.
• Application: Ford Fiesta IV, 1996 onwards.

Our Price:  £75.95  (Ex VAT at 17.5%)
 

Code: VSE5613

• Remove and install all three rear axle bushes on E36 and E46 BMW 3 Series.
• Features a variety of adaptors and plates used in various combinations for extracting and installing old/new bushes.
• Suitable for in situ operation.
• Presented in a carry-case with each part numbered for simple selection.

Our Price:  £224.95  (Ex VAT at 17.5%)